1. Shop
  2. Iwaki dosing pumps
  3. Iwaki solenoid metering pumps series EJ-R
Public Pricelist

Iwaki solenoid metering pumps series EJ-R

This product is no longer available.

In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
 
The offer is exclusively for professionals. 

Repair Service
Repair tickets and spare part list

Application areas in dosing technology

Fields of application and possible uses of our dosing systems.

 Contact person for 

individula configurations

We offer the right solution for you. If you have any questions about the product, just give us a call.

Iwaki metering pump EJ-R series

The precise chemical injection of the EJ series is done with chemical injection at an economical cost. The universal voltage capability allows operation from 100-240VAC in almost all countries. The EJ series is compact, easy to use and has outputs up to 4.8 L/h and a maximum pressure of 1.0 MPa.

  • Compact diaphragm dosing pump with magnetic drive

  • Power adjustment via stroke frequency/min. 0-30 SPM

  • LCD display

  • Control via contact switch

  • Power supply 100-240V. 50/60Hz

Max flow rate:

Max. pressure:

Pumphead:

Power consumption:

4.8 l/h

10 bar

PVC/ PP

12 W

Compact dimensions



Product designation 

Max. pressure:

Max. pressure:

EJ - B09 ER

0 - 1.14 litres / h

12 bar

EJ - B11 ER

0 - 1.8 litres / h 

10 bar

EJ - B16 ER

0 - 3.0 litres / h

6 bar

EJ - B21 ER

0 - 4.8 litres / h

3 bar

without stroke length adjustment; compact dimension; 360 strokes/min; 100 - 240V/50 - 60Hz

 

Pump.












TypeB11B16B21

Max. Power
L/H2022-08-013.02022-08-04

mL/min305080

Max. Operating pressure
1.00.60.3

Stroke rate1 to 360

Power consumption12 watts


Current consumption0.8 A


Weight1.5 Kg









The above information is based on pumping clean water at rated voltage and ambient temperature. The supply voltage must be within the range specified below. Flow rates were collected at the maximum discharge pressure and 360spm. The flow rate increases as the discharge pressure decreases.
Allowable ambient temperatur range:             0-40°C
Allowable fluid temperature      range:               0-40°C
Allowable voltage deviations:   ±10% in the rated voltage range
Noise level:                                     65dB at 1m (A scale)



Controller




Mode of operationModeManual
EXT
Mode selectionVia key input
Stroke rateSetting range1 to 360 strokes/minute
Stroke rate programming
Up key
STOP functionInput signalContact closure or open collector Note1
EXT modeMax. Stroke rate
360 strokes/minute
Mode of operation1 stroke per input pulse Note2
Input signalContact closure or open collector Note2
MontorsLCD7x3 LCD with 3 status codes
LEDGreen LEDx1 (flashes on each stroke).
accumulatorNon-volatile memory
Supply voltage Note3100 - 240VAC 50/60Hz



Note 1: Maximum voltage from the EJ to an external contact = 15V at a current up to 3 mA. When using relays, the current should always remain below 3 mA
.
Note 2: If the maximum allowable input pulse rate is exceeded, these pulses will not be counted or stored.
Note 3: Damage may occur if the operating voltage exceeds 264V.
Operating instructions
English

product data sheet:
English
 
 

Questions about choosing the right product ?

Questions about our product ? We will be happy to answer them by phone or email.


Please contact us