Grundfos SMD.09.21 .1478.Ex.5.0B Submersible mixers 99219140

    5,207.70 € 5,207.70 € 5207.7 EUR

    5,207.70 €

    Option not available

    Diese Kombination existiert nicht.

    Add to cart

    Axial force: 170 N | Thrust-to-power ratio: 0.179 | Rated current: 2.6 A | Nominal flow rate: 54.2 l/s | Propeller diameter: 210 mm


    In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
     
    The offer is exclusively for professionals. 

    Grundfos 99219140 submersible agitators SMD.09.21 .1478.Ex.5.0B

    Product Number: 99219140

    EAN Number: 5712608904509


    Direct-drive submersible agitators with motors from 0.9 to 3.5 kW for circulating and suspending liquids with low or medium viscosity. Grundfos SMD series of horizontal submersible agitators are designed for mixing, i.e. homogenizing and suspending, of liquids with low to medium viscosity.

    Accessories


    No installation set

    Tech. Details

    Product information
    Product information.TypeSubmersible agitators
    Product number
    99219140
    Product Name
    SMD.09.21 .1478.Ex.5.0B
    EAN number
    5712608904509
    Electrical data
    Std. engine IEC
    Power consumption P1 1.05 kW
    Actual power consumption 0.95 kW
    Motor rated power P2 0.9 kW
    Net frequency 50 Hz
    Dimensioning voltage 3 x 400-415 V
    Voltage tolerance +6/-10 %
    rated current 2.6 A
    Startup current 23 A
    Cos phi - power factor 0.67
    Cos phi at 3/4 load 0.58
    Cos phi at 1/2 load 0.45
    Engine efficiency at full load 86.4%
    Efficiency of the engine at 3/4 load 85.2%
    Motor efficiency at half load 81.3%
    Motorpole 4
    Switch-on type Direct
    Protection class (according to IEC 34-5) IP68
    Heat class (IEC 85) F
    Explosion-proof Yes
    Built-in motor protection PTO (thermal switch)
    Cable length 15 m
    Type of cable plug No plug
    Installation
    Maximum installation depth 20 m
    Technical data
    Thrust-to-power ratio 0.179
    Axial force 170 N
    Nominal flow rate 54.2 l/s
    Main flow velocity 1.57 m/s
    propeller speed 1478 1/min
    Propeller diameter 210 mm
    Number of propeller blades 2
    Torque K.A.
    Slip ring seal LIP SEAL
    Supported medium Media temperature range 5 ... 40 °C
    pH range 4-10
    Materials Motor AISI 1.4408
    Propeller 1.4408
    Secondary shaft sealing SIC/SIC
    Type of control. Humidity sensor Without humidity sensor
    Other Net weight 37 kg
    Country of origin HU
    Tariff No. 84798200
    Ex-description db h IIB T4 Gb

    Properties:



    The SMD submersible agitators are made entirely of stainless steel. The efficiency optimized propeller is directly driven by the motor.


    The squirrel-cage induction motor (efficiency class IE3) is protected against overload with the help of three bimetallic thermal switches (PTO) built into the windings. Optionally, the submersible agitators can also be equipped with three thermistors (PTC sensors).

    .

    To prevent the surrounding liquid from penetrating, the SMD submersible agitators have a multi-stage sealing system consisting of lip seals as a pre-seal that presses against the wear ring and a double mechanical seal in cartridge design. The sealing surfaces of the outer mechanical seal are made of silicon carbide/silicon carbide and the sealing surfaces of the inner mechanical seal are made of synthetic carbon/ceramic.



    SMD submersible agitators from 1.9 kW are equipped with a humidity switch as standard. For submersible agitators up to 1.8 kW, a humidity switch can be installed as an option.


    For SMD submersible agitators from 1.9 kW, the oil-filled seal housing can be monitored for water ingress using an optional leakage sensor. In the event of moisture ingress, an alarm signal is emitted by the sensor and/or the motor is switched off. For this purpose, the sensor must be connected to the Grundfos relay ALR-20/A.



    The stainless steel shaft is supported with the help of two permanently lubricated ball bearings.


    Motor power ranges from 0.9 to 3.5 kW.



    A variety of stainless steel or galvanized steel accessories are available for easy installation and trouble-free operation.

    Worth knowing about Grundfos

    Grundfos is one of the world's leading suppliers of high-efficiency pumps and the world market leader for circulators in heating technology. In addition to stainless steel pumps for industrial applications Grundfos offers innovative pumps for the building services and water management. As an authorized service partner, you will find in our profluid webshop a large selection of the extensive Grundfos range. Through excellent service, advice by phone and fast delivery, we offer a suitable we offer a suitable (pump) solution for almost every application. solution. You too can benefit from our large selection at top prices!