Grundfos SE2.110.250.200.4.52L.C.N.51D.A submersible pump 99776886
Maximum delivery head: 12 m | Max. Max. operating pressure: 8 bar | Media temperature range: 0 ... 40 °C | Starting current: 381/209 % | Rated speed: 1478 1/min
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 99776886 Submersible pump SE2.110.250.200.4.52L.C.N.51D.A
Product Number: 99776886
EAN Number: 5713834119828
Submersible pumps and dry-installed Grundfos SE/SL wastewater pumps (9-30 kW) are either equipped with: S-tube® (SE/SE1/SE2 and SL/SL1/SL2) or SuperVortex impeller (SLV). The free passage through the pump varies from 35-125 mm depending on the size and impeller variant. Non-self-priming, single-stage submersible pump for pumping wastewater, service water and untreated raw sewage. The pump is suitable for both intermittent and continuous operation. With cooling jacket, so that in addition to wet installation, dry installation is also possible without additional motor cooling. With S-tube® impeller with a free ball passage of 110 mm. For wastewater with a dry matter content of up to 3 %. With SmartTrim system for impeller gap adjustment to maintain maximum performance over the life of the pump. With Grundfos SmartSeal sealing system for a leak-free connection to a coupling foot bend.
Accessories
No installation set |
Tech. Details
Product information | ||
Product Information | Type | Submersible pump |
Product number |
99776886 | |
Product Name |
SE2.110.250.200.4.52L.C.N.51D.A | |
EAN number |
5713834119828 | |
Electrical data |
Power Consumption P1 | 22.7 kW |
Net frequency | 50 Hz | |
Dimensioning voltage | 3 x 380-415/660-690 V | |
Voltage tolerance | +10/-10 % | |
Max starts per hour | 20 | |
Designated current | 43-39/25-24 A | |
Maximum power consumption |
41 A | |
Startup current | 381/209 % | |
Current at idle | 20.1 A | |
Engine efficiency at full load | 0.88 | |
Motor efficiency at 3/4 load | K.A. | |
motor efficiency at half load | 0.85 | |
Motorpole | 4 | |
Switch-on type | Y/D | |
Insulation class (IEC 85) | H | |
Explosion-proof | no | |
Cable length | 10 m | |
Cable type | S1BN8-F | |
Cable size | 7G4+5X1.5ST | |
Resistance | 4.95 mOhm/m | |
Winding resistance | 0.390 ohms | |
Cos phi at zero load | K.A. | |
cos phi 1/1 | 0.81 | |
cos phi 1/2 | 0.69 | |
cos phi 3/4 | 0.74 | |
Motor rated power P2 | K.A. | |
Nominal current at 3/4 charge | K.A. | |
Nominal current at 1/2 charge | K.A. | |
Startup torque | K.A. | |
Torque of the motor | K.A. | |
Moment of inertia | K.A. | |
Heat class (IEC 85) | K.A. | |
Temperature protection | K.A. | |
Type of cable connector | K.A. | |
Size of the operating capacitor | K.A. | |
Size of the starting capacitor | K.A. | |
Installation |
Environmental temperature | -20 ... 40 °C |
Max. Working pressure | 8 bar | |
Connection | DIN | |
Size of the suction nozzle | DN 250 | |
Size of the pressure port | DN 250 | |
Name printing | PN 10 | |
Maximum installation depth | 20 m | |
Size | 52 | |
Pressure port connection | K.A. | |
Maximum installation depth | K.A. | |
Maximum ambient temperature | K.A. | |
Explosion protection standard | K.A. | |
Technical data |
Maximum flow | 236 l/s |
Maximum head | 12 m | |
Wheel type | DUAL S-TUBE | |
Maximum grain size | 110 mm | |
admissions | CE,EAC,RCM | |
Cooling jacket (Yes/No) | Y | |
Designated speed | 1478 1/min | |
Slip ring seal | K.A. | |
Maximum hydraulic efficiency | K.A. | |
characteristic tolerance | K.A. | |
Cooling jacket | K.A. | |
Cargo. | Media temperature range | 0 ... 40 °C |
Materials | Impeller material | Grey cast iron |
Impeller | EN 1561 EN-GJL-250 | |
Impeller material according to ASTM | ASTM A48-35B | |
engine | Grey cast iron | |
Type of control. | Temperature sensor | K.A. |
Others | Net weight | 468 kg |
Gross weight | 511 kg | |
Shippingvol. | 1.65 m³ | |
Country of origin | HU | |
Tariff No. | 84137021 | |
Sales region | K.A. | |
Danish VVS No. | K.A. | |
Fine LVI No. | K.A. | |
Norwegian NRF No. | K.A. |