Grundfos SE1.75.100.130.2.52S.C.EX.51D.A Submersible pump 99775847
Maximum delivery head: 29 m | Max. Max. operating pressure: 8 bar | Media temperature range: 0 ... 40 °C | Starting current: 245/138 % | Rated speed: 2973 1/min
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 99775847 Submersible pump SE1.75.100.130.2.52S.C.EX.51D.A
Product number: 99775847
EAN Number: 5713834101403
Submersible pumps and dry-installed Grundfos SE/SL wastewater pumps (9-30 kW) are either equipped with: S-tube® (SE/SE1/SE2 and SL/SL1/SL2) or SuperVortex impeller (SLV). The free passage through the pump varies from 35-125 mm depending on the size and impeller variant. Non-self-priming, single-stage submersible pump for pumping wastewater, service water and untreated raw sewage. The pump is suitable for both intermittent and continuous operation. With cooling jacket, so that in addition to wet installation, dry installation is also possible without additional motor cooling. With S-tube® impeller with a free ball passage of 75 mm. For wastewater with a dry matter content of up to 3 %. With SmartTrim system for adjusting the impeller gap to maintain maximum performance throughout the pump's service life. With Grundfos SmartSeal sealing system for a leak-free connection to a coupling foot bend. The pump has an explosion-proof design.
Accessories
No installation set |
Tech. Details
| Product information | ||
| Product information. | type | Submersible pump |
| Product number |
99775847 | |
| Product name |
SE1.75.100.130.2.52S.C.EX.51D.A | |
| EAN number |
5713834101403 | |
| Electrical data |
Power consumption P1 | 15.2 kW |
| Mains frequency | 50 Hz | |
| Design tension | 3 x 380-415/660-690 V | |
| Voltage tolerance | +10/-10 % | |
| Max starts per hour | 20 | |
| Designated current | 27-25/16-15 A | |
| Maximum power consumption | 26 A | |
| Start-up current | 245/138 % | |
| Current at idle | 10.7 A | |
| Efficiency of the engine at full load | 0.86 | |
| Efficiency of the engine at 3/4 load | K.A. | |
| motor efficiency at half load | 0.79 | |
| Motorpole | 2 | |
| Power-on | Y/D | |
| Insulation class (IEC 85) | H | |
| Explosion-protected | Yes | |
| Cable length | 10 m | |
| Cable type | S1BN8-F | |
| Cable size | 7G4+5X1.5ST | |
| Resistance | 4.95 mOhm/m | |
| Winding resistor | 0.572 Ohm | |
| Cos phi at zero load | K.A. | |
| cos phi 1/1 | 0.86 | |
| cos phi 1/2 | 0.72 | |
| cos phi 3/4 | 0.81 | |
| Motor rated power P2 | K.A. | |
| Nominal current at 3/4 charge | K.A. | |
| Nominal current at 1/2 charge | K.A. | |
| Start-up moment | K.A. | |
| Motor stall torque | K.A. | |
| Torque of inertia | K.A. | |
| Heat class (IEC 85) | K.A. | |
| Temperature protection | K.A. | |
| Type of cable plug | K.A. | |
| size of the operating capacitor | K.A. | |
| The size of the starting capacitor | K.A. | |
| Installation |
Environmental temperature | -20 ... 40 °C |
| Max. Operating pressure | 8 bar | |
| Connection | DIN | |
| Size of the intake manifold | DN 100 | |
| Size of pressure port | DN 100 | |
| Name printing | PN 10 | |
| Maximum installation depth | 20 m | |
| Size | 52 | |
| Connection discharge nozzle | K.A. | |
| Maximum mounting depth | K.A. | |
| Maximum ambient temperature | K.A. | |
| Explosion protection standard | K.A. | |
| Technical data |
Maximum flow rate | 45 l/s |
| Maximum head | 29 m | |
| Type of impeller | S-TUBE | |
| Maximum particle size | 75 mm | |
| Accreditations | CE,EAC,RCM,ATEX | |
| Cooling jacket (Yes/No) | Y | |
| Dimensioning speed | 2973 1/min | |
| Slip ring seal | K.A. | |
| Maximum hydraulic efficiency | K.A. | |
| characteristic tolerance | K.A. | |
| Cooling jacket | K.A. | |
| Supported medium | Media temperature range | 0 ... 40 °C |
| Materials | Impeller material | Grey cast iron |
| Impeller | EN 1561 EN-GJL-250 | |
| Wheel material according to ASTM | ASTM A48-35B | |
| engine | Grey cast iron | |
| Type of control | Temperature sensor | K.A. |
| Others | Net weight | 288 kg |
| Gross weight | 316 kg | |
| Shipping vol. | 1.04 m³ | |
| Country of origin | HU | |
| Tariff No. | K.A. | |
| Sales region | K.A. | |
| Danish VVS No. | K.A. | |
| Fine LVI No. | K.A. | |
| Norwegian NRF No. | K.A. | |