Grundfos CME 10-3 A-S-A-E-AVBE T-A-D-N compact horizontal suction pump 99073836

    4,732.80 € 4,732.80 € 4732.8 EUR

    4,732.80 €

    Option not available

    Diese Kombination existiert nicht.

    Add to cart

    Nominal delivery head: 58.34 m | Max. Operating pressure: 10 bar | Media temperature range: -20 ... 40 °C | Nominal power - P2: 5.5 kW | Nominal flow rate: 12 m³/h


    In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
     
    The offer is exclusively for professionals. 

    Grundfos CME 10-3 A-S-A-E-AVBE T-A-D-N 99073836 CME

    Product code: 99073836

    EAN Number: 5712606235179

    CME 10-3 A-S-A-E-AVBE T-A-D-N

    Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. The mechanical shaft seal is a special designed, unbalanced O-ring seal. Pipework connection is via internal NPT pipe threads. The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:

    • "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
    • "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
    • "Alarm": Motor has stopped (flashing red indicator lights).
    Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:
    • one dedicated digital input
    • two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V
    • 5 V voltage supply to potentiometer and sensor
    • one configurable digital input or open-collector output
    • Grundfos Digital Sensor input and output
    • 24 V voltage supply for sensors
    • two signal-relay outputs (potential-free contacts)
    • GENIbus connection
    • interface for Grundfos CIM fieldbus module.

    General EAN number 5712606235179
    Product No 99073836
    Material Code Material A
    Code for rubber E
    Elastomere GLRD E
    IMPELLER_MATR_QLTY_EN EN 1.4301
    IMPELLER_MATR_QUALITY_ASTM AISI 304
    Impeller Stainless steel
    Material code A
    PH_MATR_QUALITY_ASTM ASTM A48-25A
    PH_MATR_QUALITY_EN EN-GJL-200
    Pump housing Cast iron
    Pump Approvals CE,EAC,CURUS,UKCA
    Approvals for drinking water ACS,NSF61
    Code Ausführung A
    Code for shaft seal AVBE
    Curve tolerance ISO9906:2012 3B
    Impellers 3
    Model A
    Primary shaft seal AVBE
    Pump speed on which pump data are based 3480 1/min
    Pump version A
    Rated flow 12 m³/h
    Rated head 58.34 m
    Connect Code Anschl. Art S
    Connect code S
    Max pressure at stated temp 10 bar / 40 °C
    Maximum operating pressure 10 bar
    Outlet position 12
    PIPE_CONN_SIZE_INLET_INCH 1 1/2 inch
    PIPE_CONN_SIZE_OUTLET_INCH 1 1/2 inch
    Range of ambient temperature -20 .. 55 °C
    Type of connection NPT(F)
    Control Frequency converter Built-in
    Motor Enclosure class (IEC 34-5) IP55
    Frame size 112C
    Insulation class (IEC 85) F
    Mains frequency 50 / 60 Hz
    Motor standard NEMA
    Rated current 6.20-5.80 A
    Rated power - P2 3.7 kW
    Rated speed 3500-4000 1/min
    Rated voltage 3 x 440-480 V
    Service factor 1.15
    Suitable for 50/60 Hz (Yes/No) Y
    Medium Density 998.2 kg/m³
    Liquid temperature range -20 .. 40 °C
    Selected liquid temperature 20 °C
    Other Gross weight 44.8 kg
    Herkunftsland
    Minimum efficiency index, MEI ≥ 0.7
    Net weight 41.3 kg
    Terminal box position 12
    Zolltarif Nr. 84137075