Grundfos MTSE 40-35 R46 DQ screw pump 99620925
EAN number: 5713832049455 | Nominal flow rate: 69.8 l/min | Nominal head: K.A. | Maximum ambient temperature: 50 °C | Media temperature range: K.A. | Mains frequency: 50 / 60 Hz | Rated voltage: 3 x 380-500 V
In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.
The offer is exclusively for professionals.
Grundfos 99620925 Screw pumps with integrated frequency converter for cooling lubricants MTSE 40-35 R46 DQ
Product number: 99620925
EAN number: 5713832049455
Screw pump for pumping cooling lubricants and cutting oils (water-oil emulsion, at least 3 %) for machine tools. The pump is designed to be mounted on a tank with the pump hydraulics immersed in the pumped medium. The pump is equipped with a three-phase motor with frequency converter and PI controller located in the terminal box. As the motor has integrated overload and overtemperature protection, no additional motor protection is required. An external sensor (e.g. pressure sensor) can be connected to control the pump. On the terminal box of the motor there is a control panel with which the setpoint can be adjusted and the operating modes "MIN", "MAX" and "STOP" can be selected. Communication with the pump is carried out using, among other things, the Grundfos GO remote control, which is available as an accessory. The remote control can be used to make further settings and read out important operating parameters (such as actual value, speed, power consumption and current consumption).
Accessories
No installation kit |
Tech. Details
Product information | ||
Product information | Product name. | MTSE 40-35 R46 DQ. |
Product number |
99620925 | |
EAN number |
5713832049455 | |
Inch rime no. |
84136070. | |
Country of origin |
HU | |
Electrical data |
Power consumption P1. | |
Net frequency | 50 / 60 Hz | |
Dimensioning voltage. | 3 x 380-500 V | |
Service Factor | N/A | |
rated current. | 10.3-8.20 A | |
start-up current | N/A | |
nominal speed. | 360-4000 rpm. | |
Efficiency of the engine at full load. | 92.7 % | |
Protection class (according to IEC 34-5) | IP55 | |
Heat class (IEC 85) | F | |
Built-in motor protection. | ELEC | |
Std. engine | N/A | |
Built size | N/A | |
Multiple plugs. | N/A | |
IE efficiency class 50Hz. | N/A | |
Rated power - P2 | N/A | |
Suitable for 50/60 Hz. | yes | |
Number of phases. | N/A | |
Maximum current consumption | N/A | |
Nominal speed, 50 Hz | N/A | |
Efficiency. | 92.7% | |
Insulation class (IEC 85) | N/A | |
Engine protection. | N/A | |
Installation |
Maximum ambient temperature. | 50 °C |
Pressure port connection. | G 3/4" / SAE 1" | |
Installation length. | K.A. | |
Code for pipe connection. | K.A. | |
Size of the pressure port. | K.A. | |
Depth of immersion. | 280 mm | |
Max. Pressure at given temperature | K.A. | |
Port type | K.A. | |
Technical data |
Nominal flow rate. | 69.8 l/min |
Nominal head | K.A. | |
Maximum head. | K.A. | |
Test mark on the type plate. | K.A. | |
Pump version. | K.A. | |
Model | K.A. | |
Cable grommet. | K.A. | |
GLRD Code | K.A. | |
ISO acceptance class. | K.A. | |
Number of impeller chambers. | K.A. | |
No. of impellers. Impellers | K.A. | |
Shipment medium | Media temperature range. | K.A. |
Media temperature during operation |
20 °C | |
Density | 998.2 kg/m³ | |
Materials. | Pump housing. | N/A |
Impeller |
N/A | |
Material type key. | N/A | |
Wheel material according to ASTM. | N/A | |
Pump casing. | N/A | |
Type of control |
Position terminal box. | 12 o'clock. |
Others | Net Weight | 67.5 kg |
Gross weight. | 67.5 kg | |
Shipping volume. | N/A | |
Country of origin. | HU | |
Tariff No. | 84136070 | |
Minimum Efficiency Index MEI ≥ | N/A |
The pump has the following features:
Low heat input into the cooling lubricant thanks to high efficiency |
Full hydrostatic axial thrust compensation |
Extremely wear-resistant thanks to hardened components |
DQ shaft seal |
The Grundfos Eye status display shows the operating status of the pump on the control panel as follows:
"Mains power on": The motor is turning (green indicator lights, turning) or not turning (green indicator lights, stationary). . |
"Warning": Engine is turning despite warning message (yellow indicator lights, turning) or has been switched off (yellow indicator lights, stationary). |
"Alarm": The engine has been switched off (red indicator lights, flashing). |
The terminal box has several inputs and outputs, so the motor can also be used in demanding applications that require many inputs and outputs:
2 dedicated digital inputs |
3 analogue inputs (0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V) |
5 V power supply to potentiometer and sensor |
1 analogue output (0-10 V, 0(4)-20 mA) |