EMEC KMS dosing pump
This product is no longer available.
HousingMaterial: Glass-fibre reinforced polypropylene
Protection class: IP 65 (NEMA 4x)
Weight: 4.1 kg
=> Note: The product image is for illustration purposes only. Please use the description for identification.
Buy Profluid Shop online at low prices – for larger orders or volume discounts, please contact us for a customized quote. This offer is exclusively for commercial customers.
Repair Service
Request repair note and spare parts list.
EMEC KMS Solenoid Diaphragm Pumps
| MODEL | KMS-DC | KMS-MF | KMS-PH | KMS-RH | KMS-CL | KMS-EN |
| Code | KDC | KMF | KPH | KRH | KML | KEN |
| Dosage | Constant dosage (l/h, strokes/h, strokes/min) | • Multifunction(Constant or proportional, with pulse over/reduction, ppm, percent (%), batch, start-pause, 0-10 Volt, 0/4-20 mA) - Automatic venting (with dosing monitoring option) - Pulse memory (with dosing monitoring option) | Proportional to pH value0 ÷ 14 pH with dosing time limit (supplied without pH electrode) | Proportional to redox value0 ÷ 1000 mVwith dosing time limit (supplied without redox electrode)) | proportional to the chlorine value0 ÷ 2 mg/l, 0 ÷ 10 mg/lwith dosing time limit (supplied without chlorine electrode) | Integrated timer (Minute/h/day/week) |
| Adjustable stroke length | 0/25...100% | 0/25...100% | 0/25...100% | 0/25...100% | 0/25...100% | 0/25...100% |
| Stroke frequency | constant | proportional to the input signal | proportional to the measured value | proportional to the measured value | proportional to the measured value | |
| Empty alarm | x | x | x | x | x | x |
| Flow Sensor (SEFL) | x | |||||
| Stand-by input | x | x | x | x | ||
| Alarm output | x | x | option | option | option | Solenoid valve (Option) |
Accessories *Dosing head made of stainless steel (without accessories and hoses)
Injection valve 1/2" - hose connection 4x6 or 6x8 mm
Axial foot valve with empty signal level switch and 2.5 m connection cable with BNC plug
2.5 m control cable RG174 with BNC connector
1.5 m 4-pole control cable with device standard plug for "Standby" digital input and "Alarm" relay output
Fine-wire fuse 4 x 20 mm
2 fixing screws with 6-pin plugs
2 m PVDF dosing, PVC suction and PE venting hose each
Instruction manual
Pumpenkennlinien EMEC KMSA Magnet Membrandosierpumpe
Dimensions of the EMEC KMSA series.
The indicated dosing rates refer to water (H2O) at 20° C and the max. operating pressure.
Dosing accuracy: ± 2% between 30...100% stroke setting at a constant back pressure of ± 0.5 bar.
Operating conditions
Max. permissible viscosity: 100 cps
Max. suction lift: 1.5 mbar. Suction lift: 1.5 m
Storage and transport temperature: -10 ... +50° C
Operating and ambient temperature: -10 ... +45° C
Permissible media temperature: +1 ... +40° C for PP, PVC, PVDF, PMMA+1 ... +90° C for SS 316 (stainless steel)