EMEC KMS dosing pump

This product is no longer available.

HousingMaterial: Glass-fibre reinforced polypropylene
Protection class: IP 65 (NEMA 4x)
Weight: 4.1 kg

In the profluid store simply buy online - for larger orders or scale discounts please contact us for an individual offer.

The offer is exclusively for professionals.

Repair Service
Request repair note and spare parts list.

Application areas in dosing technology

Areas of application and possible uses for our dosing systems.

Contact for

Individual configurations

We offer the right solution for you. If you have any questions about the product, just give us a call.

EMEC KMS Solenoid Diaphragm Pumps

MODEL	KMS-DC	KMS-MF	KMS-PH	KMS-RH	KMS-CL	KMS-EN
Code	KDC	KMF	KPH	KRH	KML	KEN
Dosage	Constant dosage (l/h, strokes/h, strokes/min)	• Multifunction(Constant or proportional, with pulse over/reduction, ppm, percent (%), batch, start-pause, 0-10 Volt, 0/4-20 mA) - Automatic venting (with dosing monitoring option) - Pulse memory (with dosing monitoring option)	Proportional to pH value0 ÷ 14 pH with dosing time limit (supplied without pH electrode)	Proportional to redox value0 ÷ 1000 mVwith dosing time limit (supplied without redox electrode))	proportional to the chlorine value0 ÷ 2 mg/l, 0 ÷ 10 mg/lwith dosing time limit (supplied without chlorine electrode)	Integrated timer (Minute/h/day/week)
Adjustable stroke length	0/25...100%	0/25...100%	0/25...100%	0/25...100%	0/25...100%	0/25...100%
Stroke frequency	constant	proportional to the input signal	proportional to the measured value	proportional to the measured value	proportional to the measured value
Empty alarm	x	x	x	x	x	x
Flow Sensor (SEFL)		x
Stand-by input	x	x	x	x
Alarm output	x	x	option	option	option	Solenoid valve (Option)

Accessories *Dosing head made of stainless steel (without accessories and hoses)

Injection valve 1/2" - hose connection 4x6 or 6x8 mm
Axial foot valve with empty signal level switch and 2.5 m connection cable with BNC plug
2.5 m control cable RG174 with BNC connector
1.5 m 4-pole control cable with device standard plug for "Standby" digital input and "Alarm" relay output
Fine-wire fuse 4 x 20 mm
2 fixing screws with 6-pin plugs
2 m PVDF dosing, PVC suction and PE venting hose each
Instruction manual

The device complies with the following EU standards: -Low Voltage Directive (2014/35/EU) -EMV Directive (2014/30/EC) -RoHS - Directive (2011/65/EU)-EN ISO 12100:2010-EN 809:1998 + A1:2009 + AC:2010 -EN 61010-1:2010-EN 50581:2012 -EN 61000-6-2:2005 + AC:2005 -EN 61000-6-3:2007 + A1:2011 + AC:2012

Technical details EMEC metering pumps series KMS

MODEL KMS		DOSIERLEISTUNG	HUB VOLUME	CP*	SHUTTLE	VALVE
DC	2001	1 l/h - 20 bar	0.09	I	4 x 6	3/8"
MF	1802	2 l/h - 18 bar	0.19	L	4 x 6	3/8"
PH	1504	4 l/h - 15 bar	0.37	L	4 x 6	3/8"
RH	1005	5 l/h - 10 bar	0.46	L	4 x 6	3/8"
CL	808	8 l/h - 8 bar	0.74	L	4 x 6	3/8"
EN	501	1 l/h - 5 bar	0.09	I	4 x 6	3/8"
	510	10 l/h - 5 bar	0.93	L	4 x 6	3/8"
	0218	18 l/h - 2 bar	1.67	M	6 x 8	3/8" (1/2" in SS316)

Pump wrench

Model KMS

2001


	HYDRAULISCHE KOMPONENTEN
	Dosing head CP*	O-rings	valves		Membrane	Hoses		Viscosity
	Dosing head CP*	O-rings	Corpus	balls	Membrane	print side	suction side	max. CPS
K	PVDF	FKM B (Viton)	PVDF	ceramic	PTFE	PVDF	PVC	100
P	PVDF	EPDM	PVDF	ceramic	PTFE	PVDF	PVC	100
Y	PVDF	WAX (Nitrile)	PVDF	ceramic	PTFE	PVDF	PVC	100
V	PP	FKM B (Viton)	PP	ceramic	PTFE	PE	PVC	100
D	PP	EPDM	PP	ceramic	PTFE	PE	PVC	100
W	PP	WAX (Nitrile)	PP	ceramic	PTFE	PE	PVC	100
J	PVDF	FKM B+PTFE	PVDF	ceramic	PTFE	PVDF	PVC	100
S	PVDF	Silicone	PVDF	ceramic	PTFE	PVDF	PVC	100
A	PMMA**	FKM B (Viton)	polypropylene	ceramic	PTFE	PE	PVC	100
$	PMMA**	FKM B (Viton)	polypropylene	SS	PTFE	N/A	N/A	100
Z	SS 316***	FKM B (Viton)	SS	SS	PTFE	N/A	N/A	100

ELECTRICAL DATA
Stroke frequency		Average power consumption at max. metering capacity
min.	max.	230 VAC (190-265 VAC-50/60 Hz)	115 VAC (90-135 VAC-50/60 Hz)	24 VAC/VDC (20-32 VAC/VDC-50/60 Hz)
Hübepro Std.	Hübepro Min.
1	180	19 watts	24 Wat	12 Watt
		1 A	500 mA	2 A

Power supply voltage
00	230 VAC Schuko plug
0S	230 VAC plug Australia
01	230 VAC without connector
03	115 VAC Stecker US
04	24 VAC without plug
05	12 VDC*
07	24 VDC

Pumpenkennlinien EMEC KMSA Magnet Membrandosierpumpe

Dimensions of the EMEC KMSA series.

The indicated dosing rates refer to water (H2O) at 20° C and the max. operating pressure.
Dosing accuracy: ± 2% between 30...100% stroke setting at a constant back pressure of ± 0.5 bar.

Operating conditions
Max. permissible viscosity: 100 cps
Max. suction lift: 1.5 mbar. Suction lift: 1.5 m
Storage and transport temperature: -10 ... +50° C
Operating and ambient temperature: -10 ... +45° C
Permissible media temperature: +1 ... +40° C for PP, PVC, PVDF, PMMA+1 ... +90° C for SS 316 (stainless steel)